By Michelle 
Have you ever wondered about the ways in which we can enhance the life of water pipelines in our households? If you have broken pipes or blocked drains, or you simply are looking for ways to strength and durability of your existing pipelines pipe relining can be the solution to all the above.
Pipe relining is the most cost-effective method for fixing all types of repairs that your drainage system might need. For a reliable blocked drain pipe relining service in Australia, contact Wilco relining. They have licensed and well-trained group of workers who can take up all forms of plumbing works including step by step process of relining.
The right way and steps of pipe relining
To ensure that your pipes remain strong for years to come, you must get your pipelines relined in a proper manner that is listed in the following steps:
Have you ever wondered about the ways in which we can enhance the life of water pipelines in our households? If you have broken pipes or blocked drains, or you simply are looking for ways to strength and durability of your existing pipelines pipe relining can be the solution to all the above.
Pipe relining is the most cost-effective method for fixing all types of repairs that your drainage system might need. For a reliable blocked drain pipe relining service in Australia, contact Wilco relining. They have licensed and well-trained group of workers who can take up all forms of plumbing works including step by step process of relining.
The right way and steps of pipe relining
To ensure that your pipes remain strong for years to come, you must get your pipelines relined in a proper manner that is listed in the following steps:
- Contact a reliable and licensed plumbing service provider:
- The well-experienced plumber will give you a time when he will visit your house to carry out the investigation to find the source of blockage.
- Small cameras that can fit the narrow pipelines are used by these plumbers to reach the area of blockage or damage and find out the cause.
2. Clear the pipeline by removing any blockages:
- They will clear the blockages using a robotic cutter.
- This is followed by applying high-pressure jet of water to clean and clear the pipelines thoroughly.
3. Final check for any remaining dirt or blockages:
- They will conduct a final check to get the pipelines clear from any remaining material that can cause future blockages or interfere with the proper application of relining material.
4. Preparation of the material used for relining pipelines:
- The plumber will measure the dimensions of the pipe to establish an estimate of the material that will be required to effectively line the pipe.
- The plumber will then mix various materials used to prepare the final relining mixture.
- Most common materials used as pipe liners are epoxy, resin, glass-fiber reinforced plastic, and polyester.
- The final mixture is then passed through a liner which is used to efficiently line the entire surface area of the pipeline until it is properly attached to the entire pipe.
5. Final insertion of pipe lining:
- A special inversion drum is used to proceed with this step.
- It is used to blow the liner mixture into the inner surface of the pipe.
- This is continued until both the sides of the pipe are well covered and attached with the liner.
- Water is then used to reduce the time it takes for the resin to completely cool down.
- In the last step, any excess liner material especially near the pits and junctions is scraped off using a grinder.
The pipe relining can last anywhere from 10 to 50 years depending on how thoroughly the procedure was carried out and how well maintained the pipelines are. If your pipeline is damaged beyond the scope of relining, you might need to get it fully replaced, which is going to be an expensive and long process.